35 found, showing page 1 of 3
$7.20
LOW GLOSS FLOOR REVIVER
Quickly and easily renews the beauty of interior hardwood floors that are dull, scratched or show signs of wear. Stronger and more durable than a polish. Reviver is a topcoat that restores shine and provides a layer of protection to any unwaxed, polyurethane-finished floor. It is NOT designed for use on floors that are in very poor condition that have damage or large areas where the finish is worn away. Refer to polyurethane for floors to resurface damaged wood floors. Apply with a damp painter's pad or synthethic applicator with long handle. The water-based formula is easy to clean-up and dries to touch in 2-3 hours and 24 hours for normal use. Packaged in a squirt quart bottle for easy application. Covers approximately 175 to 225 sq. ft. per quart. Size: Quart.
View Details
$81.00
VOC GLOSS FLOOR POLY
Polyurethane for floors has 3 big benefits that make it unique and different from fast-dry poly. First, the dry time is3 to 4 hours, 25\% faster than traditional poly. Second, if you recoat within 12 hours, you don't have to sand between coats. Third, poly for floors is formulated with advanced anti-setting agents that keep the flattener (used in satin andsemi-gloss) suspended all day, which results in less stirring time. This clear, oil-based protective finish is specifically formulated for hardwood floors. Apply with natural bristle brush or synthetic stain pad. Drying time could be longer if using a lambswool applicator due to thicker coat. Can be applied over Minwax wood finish or gel stain. The result is a beautiful, durable, even sheen across the floor. Covers approximately 400 to 450 sq. ft. per gallon depending on porosity of surface. Clean up with mineral spirits. VOC compliant in some areas.
View Details
$99.99
GLOSS FLOOR POLYURETHANE
Delivers superior polyurethane durability with the convenience of a water-based finish. It is formulated to withstand heavy foot traffic. Imparts floors with depth and warmth, enhancing a floor's natural wood grain. Great for all hardwood interior floors, no sanding between coats. Fast drying formula allows recoat in 2 to 3 hours. Low odor of the water-based poly and it's easy clean up with soap and warm water completes the topcoating in 1 day. Water-based polyurethane can be used to recoat a floor that was previously finished with an oil-based poly as long as the floor is prepared following the label directions. The water-based poly can be applied over oil-based Minwax stains. It is not recommended to use water-based stains on floors because they dry quickly making them difficult to apply evenly on large surface areas. 3 coats of water-based polyurethane are recommended for heavy traffic areas. Water-based polyurethane base coat must be applied on unstained wood floors prior to applying the water-based polyurethane for floors to avoid tannin discoloration in natural wood. Covers approximately 400 to 500 sq. ft. per gallon. Size: Gallon.
View Details
$99.99
S/G FLOOR POLYURETHANE
Delivers superior polyurethane durability with the convenience of a water-based finish. It is formulated to withstand heavy foot traffic. Imparts floors with depth and warmth, enhancing a floor's natural wood grain. Great for all hardwood interior floors, no sanding between coats. Fast drying formula allows recoat in 2 to 3 hours. Low odor of the water-based poly and it's easy clean up with soap and warm water completes the topcoating in 1 day. Water-based polyurethane can be used to recoat a floor that was previously finished with an oil-based poly as long as the floor is prepared following the label directions. The water-based poly can be applied over oil-based Minwax stains. It is not recommended to use water-based stains on floors because they dry quickly making them difficult to apply evenly on large surface areas. 3 coats of water-based polyurethane are recommended for heavy traffic areas. Water-based polyurethane base coat must be applied on unstained wood floors prior to applying the water-based polyurethane for floors to avoid tannin discoloration in natural wood. Covers approximately 400 to 500 sq. ft. per gallon. Size: Gallon.
View Details
$99.99
SATIN FLOOR POLYURETHANE
Delivers superior polyurethane durability with the convenience of a water-based finish. It is formulated to withstand heavy foot traffic. Imparts floors with depth and warmth, enhancing a floor's natural wood grain. Great for all hardwood interior floors, no sanding between coats. Fast drying formula allows recoat in 2 to 3 hours. Low odor of the water-based poly and it's easy clean up with soap and warm water completes the topcoating in 1 day. Water-based polyurethane can be used to recoat a floor that was previously finished with an oil-based poly as long as the floor is prepared following the label directions. The water-based poly can be applied over oil-based Minwax stains. It is not recommended to use water-based stains on floors because they dry quickly making them difficult to apply evenly on large surface areas. 3 coats of water-based polyurethane are recommended for heavy traffic areas. Water-based polyurethane base coat must be applied on unstained wood floors prior to applying the water-based polyurethane for floors to avoid tannin discoloration in natural wood. Covers approximately 400 to 500 sq. ft. per gallon. Size: Gallon.
View Details
$22.99
*LACQUER CLEAR
An excellent lacquer for use where fast drying and good durability is needed. Clear lacquer is water clear and will not discolor the most delicate tints. Dries in 30 minutes. Do not use over enamels. Refer to model No. 4259 for spray. Quart.
View Details
$17.99
INT TUNG OIL FINISH
Penetrates deep into wood pores to restore richness and vitality to wood. Provides a durable finish while giving an attractive hand-rubbed luster. Covers approximately 125 Sq. Ft. per quart. For interior use only.
View Details
$27.99
INT TUNG OIL FINISH
Penetrates deep into wood pores to restore richness and vitality to wood. Provides a durable finish while giving an attractive hand-rubbed luster. Covers approximately 125 Sq. Ft. per quart. For interior use only.
View Details
$28.99
EXT GLS SPAR VARNISH
The strongest name in clear protection is McCloskey Man O'War . Use on interior and exterior wood surfaces to protect and beautify for years to come. It provides superior durability with maximum UV protection which prevents weather damage, resists cracking, peeling, and resists ocean salt spray. Use on wood exterior doors, expensive hardwoods such as mahogany, garage doors, outdoor furniture, planters, wood boat trim (above water line), interior window sills and frames. This product should Not be used on floors, decks, stairs, house siding, log cabins, or below water line boat trim. Covers up to 500 sq. ft. per gallon on smooth surfaces. Dries to touch in 4 hours. Available in satin, semi-gloss and gloss finishes.
View Details
$74.99
MARINE SPAR VARNISH EXT-GLOSS
The strongest name in clear protection is McCloskey Man O'War . Use on interior and exterior wood surfaces to protect and beautify for years to come. It provides superior durability with maximum UV protection which prevents weather damage, resists cracking, peeling, and resists ocean salt spray. Use on wood exterior doors, expensive hardwoods such as mahogany, garage doors, outdoor furniture, planters, wood boat trim (above water line), interior window sills and frames. This product should Not be used on floors, decks, stairs, house siding, log cabins, or below water line boat trim. Covers up to 500 sq. ft. per gallon on smooth surfaces. Dries to touch in 4 hours. Available in satin, semi-gloss and gloss finishes.
View Details
$28.99
MARINE SPAR VARNISH EXT-SATIN
The strongest name in clear protection is McCloskey Man O'War . Use on interior and exterior wood surfaces to protect and beautify for years to come. It provides superior durability with maximum UV protection which prevents weather damage, resists cracking, peeling, and resists ocean salt spray. Use on wood exterior doors, expensive hardwoods such as mahogany, garage doors, outdoor furniture, planters, wood boat trim (above water line), interior window sills and frames. This product should Not be used on floors, decks, stairs, house siding, log cabins, or below water line boat trim. Covers up to 500 sq. ft. per gallon on smooth surfaces. Dries to touch in 4 hours. Available in satin, semi-gloss and gloss finishes.
View Details
$74.99
MARINE SPAR VARNISH EXT-SATIN
The strongest name in clear protection is McCloskey Man O'War . Use on interior and exterior wood surfaces to protect and beautify for years to come. It provides superior durability with maximum UV protection which prevents weather damage, resists cracking, peeling, and resists ocean salt spray. Use on wood exterior doors, expensive hardwoods such as mahogany, garage doors, outdoor furniture, planters, wood boat trim (above water line), interior window sills and frames. This product should Not be used on floors, decks, stairs, house siding, log cabins, or below water line boat trim. Covers up to 500 sq. ft. per gallon on smooth surfaces. Dries to touch in 4 hours. Available in satin, semi-gloss and gloss finishes.
View Details
$22.99
CLEAR GLOSS LACQUER
A beautiful, clear protective finish for interior wood and metal surfaces. It dries to the touch in 30 minutes, ensuring a smooth, dust-free finish. May be used over bare wood or surfaces coated with Minwax wood finish. Also compatible with Minwax gel stain and water-based stains. Recoat in only 2 hours, with no sanding needed between coats. Available in quarts and spray. Covers approximately 25 to 37 sq. ft. per quart.
View Details
$22.99
CLEAR SEMI-GLOSS LACQUER
A beautiful, clear protective finish for interior wood and metal surfaces. It dries to the touch in 30 minutes, ensuring a smooth, dust-free finish. May be used over bare wood or surfaces coated with Minwax wood finish. Also compatible with Minwax gel stain and water-based stains. Recoat in only 2 hours, with no sanding needed between coats. Available in quarts and spray. Covers approximately 25 to 37 sq. ft. per quart.
View Details
$22.99
*CLEAR SATIN LACQUER
A beautiful, clear protective finish for interior wood and metal surfaces. It dries to the touch in 30 minutes, ensuring a smooth, dust-free finish. May be used over bare wood or surfaces coated with Minwax wood finish. Also compatible with Minwax gel stain and water-based stains. Recoat in only 2 hours, with no sanding needed between coats. Available in quarts and spray. Covers approximately 25 to 37 sq. ft. per quart.
View Details
